CUSTOM DESIGN AND MANUFACTURE - Security Design
15619
page-template,page-template-full_width,page-template-full_width-php,page,page-id-15619,theme-bridge,woocommerce-no-js,ajax_fade,page_not_loaded,,columns-4,qode-theme-ver-16.7,qode-theme-bridge,wpb-js-composer js-comp-ver-4.12,vc_responsive
 

CUSTOM DESIGN AND MANUFACTURE

High security PTZ enclosure

Designed originally for Sony BRC PTZ used on the Coastwatch CCTV project this development incorporated 12mm float glass that joined perpendicular to the camera lens and CCD. This feature and the camera lens geometry made the glass join line invisible to the camera. With a built in sun shield and high levels of mechanical protection this enclosure or custom variations with 360 degree pan options are ideal for protecting equipment in the field from mechanical damage and weather extremes.

High security PTZ enclosure - custom design and manufacture by Security Design Co, Brisbane
Vandal resistant pole mount housing design and manufacture by Security Design Co, Brisbane

Vandal resistant pole mount housing

A unique housing designed for remote outstations with high levels of vandalism. The key features are that the pan and tilt as well as the pole mount are only accessible from within the housing. These features alongside the mechanical protection of the recess mounted lens is an ideal solution for the highest levels of vandal attack.

IP 65 Monitor Enclosure

A design for outdoor monitor enclosures from 32 to 70 inch.

Taper fit Vesa mounting plate included allowing fast install and removal of screens without the need for tools.

Enclosure features natural convection and improved heat dissipation through top mounted heat sinks with optional  Peltier cooling for extreme environments. Custom sizes manufactured to order with a lead time of 20 working days.

IP 65 Monitor Enclosure - custom design and manufacture by Security Design Co, Brisbane.
Housing for looking up - custom design and manufacture by Security Design Co, Brisbane.

Housing for looking up

Designed for looking up at the sides / balconies  of high-rise buildings, this enclosure features a flat lens with no frame that would trap water and condensation on the lens. In addition the lens is coated with a 3M Hydrophobic coating, this coating beads water and even on virtually flat surfaces, moisture and water rolls away from the coating. The added advantage of this coating is that the dust is collected by the water beads and results in a self cleaning action.